What Influence the Capacity of Wood Pellet Machine

Why are the output of the wood pellet machines with the same model different? With the rapid development of biomass new energy industry, and more and more people are familiar with wood pellet machines. There are also many people who judge the situation and seize the opportunity of this industry to engage in the production of wood pellets. Of course, the quality and standards of the wood pellet machine produced by different manufacturers are different. Often when many customers bring materials to the manufacturer, the output is very high, but the output will be too low if the equipment is bought back and produced by yourself. So the problem is that the same equipment with uneven output. Why?

1. The grinding of the new mold of thepellet machine is very important. The new mold has a certain running-in period and needs to be ground with oil. Under normal circumstances, the moisture content of sawdust should be controlled between 10-15%. Adjust the gap between the roller and the mold to make it reach a good condition. After adjusting the roller, the fixing bolt must be tightened.

2. The size and moisture content of the material. Sawdust pellet machine can realize the uniform discharge of the material size must be smaller than the diameter of the pellet, the pellet diameter is 6-8 mm, the material size must be smaller than it, and the moisture of the raw material must be between 10-15%. Excessive or small moisture will affect The yield of pellets.

3. Choose the appropriate compression ratio of the wood pellet machine mold. Different materials correspond to the compression ratio of different molds. The compression ratio can be determined when the manufacturer tests the machine. The key issue is that you should not easily replace the material after you buy the equipment. If the material is changed, the compression ratio will change, and the corresponding mold must be changed. The discharging material is sometimes discharged, sometimes not, which may be related to the aging degree of the wood pellet machine mold, which requires timely replacement of suitable molds. Different models have different life. Take the model 560 pellet machine as an example, the life of the die is about 1000 hours.

RotexMaster focuses on the R&D and production of wood pellet equipment. The new vertical ring die pellet machine produced is the advanced wood pellet and straw pellet production equipment. Welcome domestic and foreign customers to consult and negotiate.