Home > News

News

Wood Chipper Machine is Affected by the Humidity and Curvature of the Wood

Wood chipper machine is an important equipment in wood processing machinery, also known as wood film machine, wood slicer, wood chipper machine, etc.. the name is different everywhere. The wood chipper consists of machine base, cutter, drive spindle, feed port, cover, and electric control system. It can be said to be stable mechanism, and durable. 

Wood Chipper Machine is Affected by the Humidity and Curvature of the Wood(图1)

1. The general process of processing wood chips by wood chip processing plants. After the tree was transported back to the factory from the mountain, from the wood peeling machine to the wood chipper machine, the raw wood was put into the trough peeling machine by large-scale mechanical equipment. The peeling machine utilizes the unique force generated by the rotor with the stripped teeth to make the wooden section circulate in the inner circumference of the silo plate, and also to make a rotary motion around the axis of the wood segment, and irregular jumping. At this point, the wood segment and the tooth, the wood segment and the wood segment, the friction between the wood segment and the bin are constantly rubbed, impacted, squeezed, and the bark is quickly separated.

2.The separated wood roller enters into the feeding device of the wood chipper from the conveyor belt, and the feeding device feeds the wood into the chipper, and the wood is fed from the feeding port when the wood is pressed into the cutting blade. As the cutting blade is cut at a high speed, the wood chips are fed into the area where the chips are stacked by the high-speed steam generated by the blades on the cutting blade in the cutting chamber.

3.Humidity of wood: Under normal circumstances, it is recommended to dry the wood for several days and then peeling to achieve good results. In addition, the season also has an effect on the peeling rate of wood. Generally, the peeling rate in summer is 95%, while in winter, 80%. 

4.The curvature of the wood: As the wood chipper machine is a unique force generated by the rotor with the stripped teeth, the movement of the wood section in the inner circumference of the material silo makes the wood section and the tooth, the wood section and the wood section, the wood section and the friction between the tanks is constantly rubbed, struck and squeezed, and the bark is quickly separated to achieve high peeling effect. Therefore, the bending of the wood should not be too large to prevent the wood from being separated from the teeth and cannot be separated. Generally, it is allowed. The curvature is at 8%.

Contact Us

Contact: Rotex

Phone: 86-0531-67880768

Tel: 86-0531-67880768

E-mail: sales@rotexmaster.cn

Add: North Caofan Village, Caofan Town, Zhangqiu, Jinan,Shandong